Products String Wound Filter Cartridge

String Wound Filter Cartridges

Depth-type filtration element made by tightly winding yarn or string around a perforated polypropylene or 304/316 stainless steel core. The winding pattern creates progressively smaller filtration passages, allowing the cartridge to capture suspended solids, dirt, rust, sand, and other particulate contaminants throughout its depth.

APPLICATIONS

String-Wound Filters

FEATURES

PP string wound filter cartridge

How Does a String Wound Filter Cartridge Work?

A string wound filter cartridge works through depth filtration, capturing suspended particles as liquid passes through its tightly wound yarn layers.

The filtration process typically follows three steps:

1. Liquid Inlet: Unfiltered liquid enters the filter housing and flows from the outside of the cartridge toward the central core.

2. Particle Retention: As liquid passes through the progressively layered yarn structure, suspended solids such as sand, rust, dirt, and other particles are trapped within the winding layers. Larger particles are generally retained in the outer layers, while smaller particles can penetrate deeper into the filter media.

3. Filtered Liquid Outlet: The filtered liquid passes through the central core and exits the cartridge, leaving captured contaminants behind.

Specifications

PORE RATING
Materials
Maximum operating conditions
Indirect food additive
Food contact material
Quality

Date Sheet

Product Documentation

Published JUNE 22, 2025
String Wound Filter Cartridge

Download PDF

Order Guide Information

Please choose:DiameterMembrane MaterialsRetention rating (µm)End CapLength (inch)O-Ring
B = ∅115 / ∅30P=PP1Blank = DOE10Silicone
S = ∅ 63 / ∅28CT=Cotton3D=DOE with Gasket20EPDM
5222/Fin30Viton​
10222/Flat40
20226/Fin
226/Flat

Date Sheet

Product Documentation

Published APR 12, 2024

Frequently Asked Questions

A string wound sediment water filter is used to remove suspended solids such as sand, dirt, rust, silt, and other particulate contaminants from water. It is commonly installed in water treatment systems, well water filtration, reverse osmosis pretreatment, and industrial processes to protect downstream equipment.

String wound and melt blown filter cartridges both use depth filtration to remove suspended particles, but their manufacturing structures differ. String wound filters use tightly wound yarn around a central core, while melt blown filters are made from thermally bonded fibers. Their filtration efficiency, dirt-holding capacity, and pressure drop depend on product design.

The replacement frequency of a string wound filter cartridge depends on water quality, contaminant concentration, operating conditions, and filtration requirements. Monitor the differential pressure across the filter, flow rate, and filtered liquid quality. Replace the cartridge when pressure drop increases significantly or filtration performance declines.

Yes, string wound filter cartridges are suitable for removing sediment from well water, including sand, silt, rust, and suspended particles. They are commonly used as prefilters to protect pumps, plumbing, and downstream filtration equipment. However, they cannot remove dissolved contaminants or reliably eliminate bacteria and viruses.

Pleated Filter Cartridges Compliance
Submit your existing filter part number If you have, Cofilters team will help identify a compatible replacement.
Choose Brand
*All data are secure & confidential
Scroll to Top

send your inquiry

Fill out the form below, and we will be in touch shortly.